Chapter 2 pre-installation items, Warning, Code compliance – AERCO Esteem O&M Manual User Manual

Page 10: Determining product location, Gf-125

Advertising
background image

4

Chapter 2

Pre-Installation Items

Code Compliance

This product must be installed in accordance
to the following:
• All applicable local, state, national and

provincial codes, ordinances, regulations
and laws.

• For installations in Massachusetts, code

requires the boiler to be installed by a
licensed plumber or gas fi tter, and if anti-
freeze is utilized, the installation of a re-
duced pressure backfl ow preventer device
is required in the boiler’s cold water fi ll or
make up water supply line.

• For installation in Massachusetts all direct

vented appliances must comply with the
guidelines as outlined on page 13.

• The National Fuel Gas Code NFPA54/

ANSI Z 223.1 - Latest edition.

• National Electric Code ANSI/NFPA 70.
• For installations in Canada -“Installation

Code for Gas Burning Equipment” CGA/
B149.1 or B149.2 Canadian Electrical
Code Part 1 CSA C22.1.

Standards for Controls and Safety Devices for
Automatically Fired Boilers, ANSI/ASME CSD-
1, when required.

N

OTICE

The Esteem 399 Low NOx boiler gas
manifold and gas controls meet the
safe lighting and other performance re-
quirements as specifi ed in ANSI Z21.13
latest edition.

Determining Product Location

Before locating the Esteem 399 Low NOx
check for convenient locations to:

• Heating system piping

• Venting

• Gas supply piping

• Electrical service

Ensure the boiler location allows the com-
bustion air/vent piping to be routed directly
through the building and terminate properly
outside with a minimum amount of length and
bends.

Ensure the area chosen for the installation of
the Esteem 399 Low NOx is free of any com-
bustible materials, gasoline and other flam-
mable liquids.

WARNING

F

AILURE

TO

REMOVE

OR

MAINTAIN

THE

AREA

FREE

OF

COMBUSTIBLE

MATERIALS

,

GASOLINE

AND

OTHER

FLAMMABLE

LIQUIDS

OR

VAPORS

CAN

RESULT

IN

SEVERE

PERSONAL

INJURY

,

DEATH

OR

SUBSTANTIAL

PROPERTY

DAMAGE

.

Ensure the Esteem 399 Low NOx and its con-
trols are protected from dripping or spraying
water during normal operation or service.

The Esteem 399 Low NOx should be installed
in a location so that any water leaking from the
boiler or piping connections or relief valve will
not cause damage to the area surrounding the
unit or any lower floors in the structure.

GF-125

Advertising