AERCO Esteem O&M Manual - Manual (Page 38)

32
P IPE S IZING - P ROPANE G AS
Contact the local propane gas supplier for rec-
ommended sizing of piping, tanks and 100%
lockup gas regulator.
P
ROPANE
G
AS
S
UPPLY
P
RESSURE
R EQUIREMENTS
• Adjust the propane supply regulator pro-
vided by the gas supplier for 13”w.c. maxi-
mum pressure
• Pressure required at the gas valve inlet
supply pressure port:
• Maximum 13”w.c. at fl ow or no fl ow condi-
tions to the burner
• Minimum 5”w.c. during fl ow conditions to
the burner. Must be verifi ed during start up
and with all other gas appliances operating
within the building.
GF-125