AERCO Modulex E8 Controls Guide - Manual (Page 82)

PR1: 11/30/12 Page 82 of 112
GF-115-C Modulex E8 Controller and BCM
Operations and Maintenance Manual
OMM-0084_0D
AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 • Ph: 800-526- 0288
Table 8-3: TIME PROGRAM Menu Sub-Menus and Parameters (Continued)
FUNCTION DESCRIPTION ENTRY RANGE DEFAULT
HOTW – PROG Sub-Menu
The HOTW – PROG (Hot Water
Program) Sub-Menu is used to set the
ON-OFF times for the Hot Water
Charging Pump.
The procedures for viewing/changing
ON-OFF times are identical to those
previously described for the CIRCL TIME
Sub-Menu, except they apply to the Hot
Water Charging Pump.
The days/day groups are also identical to
the those shown in the CIRCL TIME
Sub-Menu.
MONDAY
View or change the pump ON – OFF
times for Monday.
Press the Program Key to view current
settings.
Turn Rotary Knob to change displayed
ON or OFF time if required.
Press Program Key to store displayed
ON or OFF time and sequence the
display to the next function.
All ON and OFF
times can be set
in 15 minute
increments from
00:00 – 24:00
ON: 5:00h
OFF:
21:00h
TUESDAY Same as previous except for Tuesday. See prev. See prev.
WEDNESDAY Same as previous for Wednesday See prev. See prev.
THURSDAY Same as previous for Thursday See prev. See prev.
FRIDAY Same as previous for Friday See prev. See prev.
SATURDAY Same as previous for Saturday See prev. See prev.
SUNDAY Same as previous for Sunday See prev. See prev.
MO – FRI Same as above for Monday – Friday See prev. See prev.
SA – SU
Same as previous for Saturday and
Sunday
See prev.
ON: 6:00h
OFF:
22:00h
MO – SU Same as previous for Monday – Sunday See prev.
ON: 6:00h
OFF:
22:00h
RETURN
Press Program Key to exit HOTW –
PROG sub-menu.