American Access Systems Touch Plate Reader - 11-3500 - Manual (Page 5)

Page 5 American Access Systems / Security Brands, Inc.
Introduction
The 11-3500 is a stand alone access control system that will control access to a passageway for up to 3500 individuals
(1750 when the Timed Antipassback feature is activated).
There are two kinds of cards used with the 11-3500, access cards and program cards.
Access cards are used by individuals to gain access to the passageway. Each access card is magnetically encoded
with two types of information: the system code (or facility code) and the ID number. Your access cards will all have
the same system code, but each will have its own ID number. Your unique system code is what prevents cards from
other systems from activating your unit. The ID number is what distinguishes one user card from another.
Program cards (fig. 1) are used to tell the 11-3500 what it is to do. As with access cards, program cards are
magnetically encoded with a common system code and instruction information. The system code of your program
cards is the same as the system code of your access cards. Your unique system code is what prevents program cards
from other systems from programming your system. There are 15 different program cards. There are ten number cards
(0 through 9) and five function cards.
The program cards are as follows:
“0” ZERO
“1” ONE
“2” TWO
“3” THREE
“4” FOUR
“5” FIVE
“6” SIX
“7” SEVEN
“8” EIGHT
“9” NINE
“*” THRU
“VALID” VALIDATE
“VOID” VOID OR CANCEL
“SET TIMER” SET LATCH TIMER OR ANTIPASSBACK TIMER
“ACTIVE/INACTIVE” ACTIVATE OR INACTIVATE SYSTEM
1675 West Yale Ave.
Englewood, CO 80110
phone: 303-799-9757
fax: 303-799-9756
[email protected]
www.securitybrandsinc.com
SECURITY BRANDS INC