Citizen Systems Citizen CLP 6001 CLP-6001 - Manual (Page 18)

1-5
T
Names and functions of each part
CAUTION
•
When opening the cover, open it all the way.
If only part way open, the cover could slam shut,
possibly causing injury.
•
Be careful of the edge of the cover when the cover
is opened.
It may cause injury or property
damage.
•
Be careful of the edges of the plates so injury or
property damage is possible.
1) Cover
Opens to allow loading of the paper and ribbon.
2) Ribbon holder
To attach the ribbon. (See Chapter 3 Paper and Ribbon.)
3) Ribbon winder
To wind the ribbon. (See Chapter 3 Paper and Ribbon.)
4) Roll holder
Holds the roll of paper.
5) Roll guide
Guides the roll paper to be set on the roll holder. The roll guide can be
adjusted in accordance with the width of the paper.
6) Paper holder
Holds the roll holder which is inserted in the paper core.
7) Open lever
To swing the print head out of the way when loading the paper or cleaning
the print head.
8) Offset verification window
Allows you to check the position of the print head which must be adjusted to
the thickness of the paper used.
(See Chapter 3 Paper and Ribbon.)