Citizen Systems Citizen CLP 6001 CLP-6001 - Manual (Page 27)

2-6
T
Voltage setting mode
In the voltage setting mode, operate the paper gap and black line adjustment
controls so that the voltages of both "PE" and "BL" displayed on the LCD screen
read 3.0 V
−
3.3 V.
Setting procedure:
1 Sets only the liner (glassine paper) that has been peeled off the label paper.
2 Sets the paper gap level to 3.0 V
−
3.3 V (paper gap comes first).
3 Sets the black line level to 3.0 V
−
3.3 V (then black line).
Note: The order of steps 2 and 3 above may be reversed.