Citizen Systems Citizen CLP 6001 CLP-6001 - Manual (Page 50)

4-7
4.2 Power Troubleshooting
Problem Cause and remedy
No power even
with power switch
turned ON.
•
Power cord is not
properly connected to the
outlet.
•
Power cord is not
properly connected to the
power inlet.
•
Input voltage is not
correct; input voltage is
greater or less than the
rated voltage.
•
Correct RS-232C cable is
not used.
→
Turn off the power switch and
properly reconnect the power
cord to the outlet.
→
Turn off the power switch and
properly reconnect the power
cord to the power inlet.
→
Set input voltage within the rated
voltage (puncture voltage may
occur.
Contact our service
personnel).
→
Turn off the power switch and
unplug the interface cable.
Check that power turns on by
turning the power switch to ON
and then use the correct
RS-232C cable.