Citizen Systems Citizen CLP 6001 CLP-6001 - Manual (Page 57)

5-2
5.1 Auto-Cutter Unit
The auto-cutter unit that has been installed on the printer will be available.
See the operation manual of the auto-cutter for details.
T
Specifications
•
Cutting method: Circular cutter
•
Max. thickness of cut paper: 0.01 in (0.254 mm)
•
Min. length of cut paper: 1 in (25.4 mm)
5.2 Peeler Unit
The peeler unit that has been installed on the printer will be available.
See the operation manual of the peeler unit for details.
T
Specifications
•
Width of paper: 1
−
4.65 in (25.4
−
118 mm)
•
Max. diameter for roll paper: 8 in (203 mm)
•
Inner diameter for roll paper: 3 in (76 mm) or more
• Min. length of label: 1 in (25.4 mm)
• Thickness of paper: 0.0067 in (0.17 mm), max.
• Thickness of mount: 0.0027 in (0.07 mm), max.
•
Unusable paper: Special paper (Whitepet, etc.) or too
flexible paper causing jams
5.3 Adjustable Sensor (for CLP-6002 only)
The adjustable sensor that has been installed on the printer will be available.
See the operation manual of the adjustable sensor for details.
T
Specifications
• The basic specifications of the adjustable sensor are in accordance with
those of paper
•
Adjustable sensor travel: 59 mm (2.3 in) from the left edge of the paper
(reference line of setting paper).
When the adjustable sensor is travelled to
the left edge, the black line sensor cannot detect the position of 2 mm (0.078 in)
from the left edge of the paper.