Toshiba KV-9096A - Manual (Page 27)

Press the + or - SET
button and the > SHIFT
button to set start time to
8:30.
DISPLAY
CD
VTIMEM0DE/\
t J SET I 1
< >
CD* O
select
CD
TRACKING
VCD
FRI ON
FR2 ON
SAI ON
SA2 ON
SUI ON
SU2 ON
DLY ON l~8t --
EXT ON SPA24
SPA24
sp A24
sp A24
sp A24
sp A24
sp A24
SPA24
MENU=[DISPLAY]
FRI ON
FR2 ON
SAI ON
SA2 ON
ON SUI
SU2 ON
DLY ON
EXT ON
-- sp A24
-- sp A24
-- SPA24
-- SPA24
-- SPA24
-- SPA24
___ -- SPA24
SPA24
MENU-[DISPLAY]
Press the > SHIFT
button to blink end time.
Set end time to 17:00
with the SET button and
the > SHIFT button in
the same manner as 6.
DISPLAY VTIMEM0DE/\
CD SET CD
< SHIFT ■ TRACKING
CD CD VCD
■(^|hh0N SELECT
■ • PROGRAM • ■
FRI ON ---- > - --- SPA24
FR2 ON
--- » - --- SPA24
SAL ON ---- > - --- SPA24
SA2 ON ---- -- SPA24
SUI ON -- SPA24
SU2 ON ---- » - - -- s p A24
DLY ON 8 30-»[l7l 30 s p A24
EXT ON SPA24
MENU=[DISPLAY] |
FRI ON
FR2 ON
SAI ON
SA2 ON
SUI ON
SU2 ON
DLY ON
EXT ON SPA24
sp A24
sp A24
sp A24
sp A24
sp A24
___ SPA24
SPA24
MENU-[DISPLAY]
30-» 17
8 Press the > SHIFT
button and the + SET
button to set recording
time mode to SPA24.
DISPLAY vTiMEMODE^
CD CD SET CD CD
TRACKING
VCD
< SHIFT m
CD CD
PP i ON select
• PROGRAM
FRI ON
--- > ..
FR2 ON
---
SAI ON
SA2 ON - -
SUI ON - -
SU2 ON - -
DLY ON
8 30-»17
EXT ON
SPA24
SPA24
SPA24
SPA24
SPA24
SPA24
00ispA24i
SPA24
HENU=[DISPLAY]
IF A POWER FAILURE SHOULD OCCUR
If a power failure occurs, the PW.FAIL display appears
in the VCR display. To erase this display press one of
the operations buttons.
If the power failure is recovered within 10 days, and the
battery is charged continuously for more than 48 hours
in the ambient temperature, the date/time data and
timer recording programs remain in the memory.
The A TIME MODE button is pressed, the display
changes as follows.
SPA24^ SP24 ^ 30 ^ SP48 ^ 48 ^ SP72 ^ 72^
SPL01 ^ SPL02 ^ SPL03 ^ SPA2 ^ A6 ^ SPA12 -
A18 ^ SPA24
The V TIME MODE button is pressed, the display
changes in the reverse direction.
Press the DISPLAY
button twice to erase the
MENU screen.
DISPLAY VTIMEMODE^
CD SET /xCD
TRACKING < SHIFT >
O O ^CD
LOCATION SELECT
8/28/97 THU
17:30:02 s p A 2
10
Press the TIMER button.
TIMER
ISDl H
US
1 ~i ~i 11
i L ( TIMER ^ i i LJ
The power goes off and the TIMER display lights in the
VCR display.
Recording starts at the programmed start time.
o:
zo
q F
(£<
OtE
OlU
UJCL
OCO
Notes:
■ If the TIMER button is pressed at the moment between
start time and end time, recording starts immediately.
■ To cancel the timer recording, press the TIMER button.
■ The timer recording starts 10 seconds before the record
start time.
■ When the end time is set to a time earlier than the start time, the
recording is carried out up to the end time in the next day.
■ The time difference between start time and end time
should be more than 1 minute. If they are same, timer
recording doesn’t work.
■ The accuracy of the time display depends on the condi­
tions of use and the environment. Set clock to the exact
time by daily check.
■ During timer power off mode, alarm recording will not
operate at all.
During the 12 hour display, the display appears as follows.
FRI ON
FR2 ON
SAI ON -
SA2 ON -
SUI ON -
SU2 ON -
DLY ON 8
EXT ON
SPA24
SPA24
SPA24
sp A24
sp A24
sp A24
:00 pk sp A24
sp A24
MENU=[DISPLAY]
30 ak -» 5
26