Toshiba KV-9096A - Manual (Page 32)

oz
zo
OH
oc<
OCC
OlU
UJQ.
ocO
Setting the Alarm Recording
Press the DISPLAY
button.
DISPLAY yIIMEMODE/\
SET C) ____________________)
< SHIFT >
CD CD ^CD
LOCATION SELECT
CLOCK ADJUST
SETUP
DISPLAY MODE
PROGRAM
ALARM RECALL
TIME DATE SEARCH
END-[DISPLAY]
Press the > SHIFT
button to blink SETUP
and press the + SET
button.
DISPLAY
CD
VTIMEMODEA
CD SET
TRACKING
VCD < SHIR ■
CD CD
^TON SELECT
CLOCK ADJUST
SETUP
DISPLAY MODE
PROGRAM
ALARM RECALL
TIME DATE SEARCH
END-CDISPLAY]
Press the + SET button to set the alarm recording
time.
DISPLAY vTiMEMODE/\
^D SET T-CD
< shir '®'
CD O CD
LOCATION SELECT
S E T U P
ALARM REC TIME I 15S I
SPEED s p A 2
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
MENU=[DISPLAY]
Each time the + SET button is pressed, the display
changes as follows.
15S SOS ^ 1 MOOS 1M30S ^ 2M00S ^ 2M30S -
3M00S ^ 6M00S CONT. ^ MANUAL ^ 5S ^ 15S
Each time the - SET button is pressed, the display
changes in the reverse direction.
Display Recording time
5S 5 seconds recording
15S 15 seconds recording
30S 30 seconds recording
1M00S 1 minute recording
1M30S 1 minute and 30 seconds recording
2M00S 2 minutes recording
2M30S 2 minutes and 30 seconds recording
3M00S 3 minutes recording
6M00S 6 minutes recording
CONT. Recording to tape end
MANUAL Recording during alarm input
Press the > SHIFT button to blink SPEED and press
the + SET button to set the recording time mode.
DISPLAY vTIMEMODE/^
CD SET CZ)
< SHIFT T'^^CKING
CD O vO
-^^■|0N SELECT
S E T U P
ALARM REC TIME 15S
SPEED I s p A 21
RESTART REC OFF
TAPE END MODE STOP
ALARM STOP
MENU-LDISPLAY]
Each time the + SET button is pressed, the display
changes as follows.
SPA2 ^ A6 SPA12 ^ A18 SPA24 ^ SPA2
Each time the - SET button is pressed, the display
changes in the reverse order.
Press the > SHIFT button to blink TAPE END
ALARM and press the + SET button to set operation
after tape end detection.
DISPLAY vTiMEMODEA.
CD SET ^D vCD
< SHIFT-®
CD ^ VO
-^HiON SELECT
S E T U P
ALARM REC TIME 15S
SPEED SPA 2
RESTART REC OFF
TAPE END MODE STOP
ALARM I STOP I
MENU=[DISPLAY]
Each time the + SET button is pressed, the display
changes as follows.
|-^ STOP ^ CONT.—I
STOP... Stops at tape end when any alarm condition has
occurred.
CONT .. Performs an operation selected by TAPE END
MODE on MENU SCREEN when tape end is
detected.
Press the DISPLAY
button twice to erase the
display.
DISPLAY VTIME MODE/\
Cb SET CD L\(0
< SHIFT >
CD CD vo
LOCATION SELECT
8/28/97 THU
17:30:02 s p A 2
31