Toshiba KV-9096A - Manual (Page 41)

Using the SHUTTLE Dial
You can also activate the picture search and slow playback of various speed by turning the shuttle dial on the VCR.
SHUTTLE dial
The playback speed changes by turning the dial as shown below:
Turn dial to the Reverse direction
Dial CENTER
Turn dial to the Forward direction
2nd STEP Return to
center
1st STEP Return to
center
1st STEP Return to
center
2nd STEP Return to
center
REW REW REW REW STOP FF FF FF FF
Reverse
PICTURE
SEARCH
/SP:-x5\
\ E P : - x 15^
PLAY
Reverse
PLAY
(-X1)
PLAY PLAY
Forward
PICTURE
SEARCH
/ SP:x5 \
V,EP:x15y'
PLAY
Forward
PICTURE
SEARCH
/ S P : x 5 \
' \ E P : x ^ 5 J
PLAY
Reverse
SLOW
PLAY
(-X 1/30)
Reverse
SLOW
PLAY
(-X 1/30)
Reverse
SLOW
PLAY
(-X 1/30)
YSP:Field advance\
VEPiFrame advance/
STILL STILL
Forward
SLOW
PLAY
(X 1/30)
/ SP&EP: \
\Field advance/
STILL
Forward
SLOW
PLAY
(X 1/30)
Forward
SLOW
■PLAY
(X 1/30)
If you release the dial, it turns to the center position.
Notes:
As the SHUTTLE dial is turned in the stop mode, the VCR is set to the FF or REW mode and it does not go back to stop mode
until you press the STOP button. Turning the dial back to initial position does not return the VCR to the stop mode.
The reverse playback mode will be released automatically after 1 minute and the forward playback will start.
The still picture mode will be released automatically after 10 minutes and forward playback will start.
The reverse slow mode will be playback up to 255 fields.
40