Recording with the sequential switcher, Connection with the sequentiai switcher, Timing for camera switching – Toshiba KV-9096A User Manual
Page 38: D© d © d
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RECORDING WITH THE SEQUENTIAL SWITCHER
This VCR can work with a sequential switcher connected for recording.
Connection with the Sequentiai Switcher
For detailed operations and connections of the switcher, consult the Instruction Manual of the sequential switcher.
OZ
5 0
QF
QC<
OOC
OUJ
UjQ-
OCO
@
D
To REC trigg. out
\ To trigger input ^
Sequential
switcher
@
D
© D
© D
©
6
© D
n
u
To trigger grounding
n
tl
7 ^
To GND
©
0
Timing for Camera Switching
In case of using the sequential switcher for 4 channels (and recording for EPA18 mode);
Notes:
Each time a video track is recorded, the video camera is automatically switched by the position of the vertical synchroniza
tion signal.
The video camera switching time differs according to the time mode.
Record/playback picture is snowy or noisy when operating with a B/W multiplex or BA/V quad, please select the VIDEO
MODE switch to B/W mode. (See page 5.)
In EPA18 record mode, quick response switcher is necessary.
37