Toshiba KV-9096A - Manual (Page 43)

TIME DATE SEARCH
Searching a picture at a desired day and time is possible by specifying the day and hour on the MENU screen.
The VCR automatically records the current date and time (day/hour/minute). Accordingly, make sure before recording that the date
and time is exactly adjusted.
Search Operation
In case of searching the picture at day of 28, 17;30 minutes in
reverse direction;
Press the DISPLAY
button.
DISPLAY
o
VTIMEMODEA
CZ> SET CD
< SHIFT >
CD CD ^CD
LOCATION SELECT
CLOCK ADJUST
SETUP
DISPLAY MODE
PROGRAM
ALARM RECALL
TIME DATE SEARCH
END-LDISPLAY]
Press the SET button to
set the HOUR to 17 and
press the > SHIFT
button.
TIME DATE SEARCH •
DAY
HOUR
MINUTE 28
[13
00
DISPLAY
CD
yTIME MODE A
CD SET a CD
< shir T
CD O ^CD
-mhlON SELECT
FORWARD
REVERSE
MENU-LDISPLAY]
Press the SHIFT button
to blink TIME DATE
SEARCH and press the
SET button.
TIME DATE SEARCH •
DAY
HOUR
MINUTE
01
00
00
DISPLAY
CD
VTIMEMODEA
C±) GD ''CD
< shir T
CD '"CD
■^^TON SELECT
SEARCH FORWARD
REVERSE
MENU=[DISPLAY]
Press the SET button to
set the MINUTE to 30.
• TIME DATE SEARCH •
DAY
HOUR
MINUTE
28
17
DISPLAY V/TIMEMODEA,
C) CD SET ^D / t O
< shift '^
CD CD vo
LOCATION SELECT
FORWARD
REVERSE
MENU=[DISPLAY]
Press the SET button to
set the DAY to 28 and
press the > SHIFT
button.
• TIME DATE SEARCH
DAY
HOUR
MINUTE
0
00
DISPLAY
CD
yTIME MODE A
<Z3
< SHIFT
SET GD ___________________ )
TRACKING
VCD
ION SELECT ■A nic
FORWARD
REVERSE
MENU-LDISPLAY]
Press the SHIFT button
to blink the REVERSE,
and press the SET
button.
TIME DATE SEARCH •
DAY
HOUR
MINUTE 28
17
30
DISPLAY vtimemodea ,
CD SET d?
TRACKING
VCD
^T0N SELECT
SHIFT t
.^^TC
FORWARD
REVERSE I
MENU-LDISPLAY]
Note:
Time date search is not carried out if the time adjustment has been not completed.
Time date search is not carried out for tapes recorded by a unit which can’t automatically record data of time and date.
Time date search will not operate when searching a section of tape that has an alarm on it. In this case perform alarm search.
Time date search may cause a time error listed in the following to the specified time.
Time date search may not be carried out in the areas at REC start and REC end shown below.
REC start REC end
less thann
1min, - less than A
Record mode
A (Not carry out in
the REC end area
at maximum)
Time error to the
specified time at
maximum
SPA2, EPA6, SPA12,
EPA18, SPA24, SP24,
EP30, EP48, EP72
1 min. 1 min.
SP48, SP72 3 min. 3 min.
oO
<H
P
Q-o
42