Toshiba TEC MA-1700 - Manual (Page 102)

EOl-11040
BASIC KEY FUNCTIONS AND KEYBOARD VARIATIONS IN
PROGRAMMING OPERATIONS
Basic Key Functions
1. The following are main keys and their functions to be used in programming operations;
[XI or [@/FOR] . . Used to enter the program Submode No.
[ST] ................... . . . . Used to enter the Address No. or Item Code. Also used to end
the item data entries.
[#] ................. . . . . Used to enter data for the address or item. Each character code
is also entered through this key.
[AT/TL] ........................ Used to end the entire program Submode sequence.
2. Functions of the [C] key:
• When an entered program data is already printed, the [C] key cannot clear it any longer.
To correct the data, re-enter it.
• Before the entered data is printed, the data may be cleared by the [C] key.
Keyboard Variations in Programming operations
The MA-1700 provides several keyboards for programming operations,
keyboard is used, the key layout and the character entry method will vary.
Case 1:When the ECR Keyboard is Ordinary Keyboard Type :
Depending on which
1-1 .When the Ordinary Keyboard alone is used for programming, follow the instructions as they
are described in this manual. For character settings, use the CHARACTER CODE TABLES
(later stated). None of the DIRECT CHARACTER ENTRY methods are possible.
1-2. When the Programming Keyboard TKB-1 (hardware option) is connected;
1) Character Keys provided on the TKB-1 keyboard may be used to directly enter the
characters. (DIRECT CHARACTER ENTRY method). Any characters not provided on
the TKB-1 keyboard (and those provided as well) may be entered through the Numeric
Keys and the [#] key on the ECR keyboard, referring to the CHARACTER CODE
TABLES.
2) Basic Function Keys ([C], [@/FOR] (= [X]), [ST], [AT/TL]) may be depressed either on
the TKB-1 or the ECR keyboard. If any other keys not provided on the TKB-1 are
required in programming operates, operate them on the ECR keyboard (such as
Department Keys, [PLU], etc.).
- 3 4 -