Toshiba TEC MA-1700 - Manual (Page 72)

E01-11040
2.2 TRAINING MODE START AND END
When you have newly employed cashiers, you may provide the opportunities for them to train their
skills of operating the MA-1700A. You are to start and end the Training Mode. Once entering the
Training Mode, a cashier may operate just as ordinary sale entry operations. The data in the Training
Mode are processed into Training Mode Total memory but not affect any actual sales data in
business.
Outside a sale, in Cashier Signed-OFF condition (or no Cashier Keys
to ON status)
Mode Lock: MGR / GT Lock: Neutral
i Programmed Training Mode Sion-ON/OFF Code I [#]
01 to 99 (must be a 2-digit value)
^ (The Mode Lock may be turned to the “REG” position now.)
Registering operations are allowed by the trainees:
• No Cashier Sign-ONs are necessary. (The Training Mode Start itself is a kind of sign*
ON.)
• All registering operations are possible in the Training Mode
except: 1) The drawer will not open.
2) The Consecutive No. on the receipt will not be increased.
3) Customer File entries (under Check Track Memory option) are not accepted.
4) Print occurs on receipt and Journal with the Training Header message.
I
Operate the same as the TRAINING MODE START.
Now the register is in a Signed-OFF condition. You may turn tiie Mode Lock to any position
for its corresponding operations. To start sale entries, a cashier’s sign-ON or a Cashier Key
to ON status is again necessary.
NOTE: When operated Validation or Endorsement print in this mode, the printing action will take
place, but nothing will be printed.
- Refer to the sample receipts relating to the Training Mode, on the next page. -
- 4 -