Toshiba TEC MA-1700 - Manual (Page 142)

EO-11040
PRESET RATE SETTING FOR SELECTIVE ITEMIZERS (SI1 and SI2)
If any of [SI1/TL] (or fSI/TL]) and [SI2/TL] keys are installed on the keyboard, a preset rate may be
programmed on each key.
As to the functions and applications of the Selective Itemizers, refer to the description on the next
page.
Any time outside a sale
Mode Lock: SET / GT Lock: Neutral
1
Preset S11 % Rate | [SI1/TL]
(or ISI/TL])
(0.01 to 99.99(%); use the [.] key
if a decimal portion is contained.)
Preset SI 2 % Rate I [SI2rrLJ
(On a Single-SI machine, only one Selective Itemizer Total Key is installed and labeled
as “[SI/TL]”. On a dual-SI machine, two keys, labeled as *‘[SM/TLl”and “[SI2/TLJ”,
are installed.)
NOTES: 1. Whether the calculated aivount by the preset
St % rate aflects (he. add to or subtract from)
the sate total is determined by a system option
status selection.
2. To reset the rate once set, enter 0 as the rate.
(Then the rate is regarded as 100% if the
option **Non-affecf* is selected. With the
option *‘SI Affects Sate Total”, some rate
other than “0” should be programmed.)
TEC: S T O R E
1343 PEACH DRIVE
PHONE: 87-6437
T h a n k x o u
C a l L a g a i n
ex.) To set 7% as SI1 preset % rate:
Mode Lock to SET,
7 [SI1TL].
11-20-90 **3001
SIl TL 7%
0069 ll:48TM
- 7 4 -