Toshiba TEC MA-1700 - Manual (Page 109)

E01-11040
Function Keys
Except the [CODE] key, each of the function keys corresponds to the identical key installed on
the ECR keyboard as to the function in programming operations. ([CLEAR] = [C])
The [CODE] key is provided to enter the following codes.
• Department/PLU codes
• Line number for Store Name/Message and Commercial Message Programming (Submode 1)
• Cashier code for Cashier Code and Name Programming (Submode 2)
• Salesperson code for Salesperson Code and Name Programming (Submode 20)
Operation Examples
To set the Item name “COFFEE” for Dept. 2:
ON ECR KEYBOARD ONLY
403 r#l 415 r#l 406f#l
3[@ffOR][DEPT2] “5^
[ST] [ATЯL]
406Г#1 405Г#1 405Г#1
FEE
ON TKB-1 KEYBOARD ONLY
3 [X] 2 [CODE] COFFEE [ST] [ATH-L]
USING ECR AND TKB-1 KEYBOARD TOGETHER
3 [@ff=OR] [DEPT2] C O F F E ^ [ST] [AT/TL]
o n E C R on TKB-1 on ECR
([©/FOR], [ST], and [AT/TL] may be operated on ECR or on TKB-1. Code entries
such as “3” in the above example must be entered on ECR.)
The “One Double-size Declaration” (by depression [X] once prior to the required character) and the
“All Double-size Declaration” (by depressing [X] twice before the entire descriptor) are the same as in
setting characters on the ECR keyboard.
NOTE: When the code or the line No. is entered with the [CODE] key on the TKB-1, refer to the
followings.
• When programmed the sequential codes, the code designation can be skipped.
ex.) 1 [CODE] ABCD [ST]
(2 [CODE]) 1234 [ST]
(3 [CODE]
) EFGH [ST]
• When programmed the codes individually, the code designation and the depression of
the [C] key are necessary.
ex.)1 [CODE] ABCD [ST] [C]
3 [CODE] EFGH [ST]
- 4 1 -