Ecler CA‐NET RS‐232 - Manual (Page 19)

CA‐NET Protocol
page 19 / 29
DAM514
TYPE PARAM1 PARAM2 PARAM3 PARAM4 DESCRIPCIÓN
GET ALL Dumps current device status (with DATA messages)
INFO_MODEL Gets the Device model name
INFO_VERSION Gets the current Firmware Version
AUTOLOAD_PRESET1 Gets the current AUTOLOAD_PRESET1 at Startup function
PRESET_NUMBER Gets the current PRESET number
PRESET_NAME <Preset=P1:P10>
<Preset=T1:T6> Gets a certain PRESET (from P1 to P10) or TEMPLATE (from T1 to T6)
name
REMOTE_MODE <Remote=R1:R4> Gets the working mode for a certain REMOTE port (from R1 to R4)
REMOTE_INPUTS <Remote=R1:R4> Gets the list of inputs affected by the working mode of a certain
REMOTE port (from R1 to R4)
REMOTE_ZONES <Remote=R1:R4> Gets the list of outputs affected by the working mode of a certain
REMOTE port (from R1 to R4)
DISPLAY_MODE Gets the current LCD DISPLAY MODE
LCD_CONTRAST Gets the current LCD DISPLAY CONTRAST level
EXT_MUTE_ZONES Gets the outputs to be muted by an external contact closure,
connected to the MUTE port
IN_LABEL <Input=I1:I5> Gets the current LABEL (name) for the specified INPUT
IN_STEREO <Input=I4:I5> Gets the current STEREO link status (ON or OFF) for INPUTs 4 and 5
IN_MUTE <Input=I1:I5> Gets the current MUTE status (ON or OFF) for the specified INPUT
IN_VOL <Input=I1:I5> Gets the current VOLUME for the specified INPUT (general input
volume, affecting all the post processing)
IN_BASS <Input=I1:I5> Gets the current BASS tone LEVEL for the specified INPUT
IN_MID <Input=I1:I5> Gets the current MIDDLE tone LEVEL for the specified INPUT
IN_TREBLE <Input=I1:I5> Gets the current TREBLE tone LEVEL for the specified INPUT
HPF_ACTIVE <Input=I4:I5> Gets the current HIGH PASS FILTER status (ON or OFF) for the specified
INPUT
HPF_FREQUENCY <Input=I4:I5> Gets the current HIGH PASS FILTER frequency (Hz) for the specified
INPUT
FBS_ACTIVE <Input=I4:I5> Gets the current FEEDBACK SUPPRESSOR feature status (ON or OFF)
for the specified INPUT