Ecler CA‐NET RS‐232 User Manual
Page 6
CA‐NET Protocol
page 6 / 29
o
IN_SEL_IN_LEVEL: one input (source) selection for one or several output zones (with
the 5 position selector) + the control of the selected input’s crosspoints level to the
destination zones
o
IN_SEL_ZONE_VOL: one input (source) selection for one or several output zones
(with the 5 position selector) + the control of the affected zones output volume
o
PRESET: a preset recovery, from P1 to P5 (with the 5 position selector)
o
PRESET_ZONE_VOL: a preset recovery, from P1 to P5 (with the 5 position selector) +
volume control for one or several zone outputs
PAGER
/
DUCKER
parameter for
TALKOVER_MODE
command:
o
INPUT 5 can be used with the Talkover feature in PAGER or DUCKER mode. PAGER
mode requires an external paging station (MPAGE4) to select the destination zones
and performing the paging
o
INPUT 4 can be used with the Talkover feature just in DUCKER mode