EVCO EVCSR338J9 - Manual (Page 18)

EVCO S.p.A. Vcolor 338 S | Installer manual ver. 1.2 | Code 144VC338SE124
page 18 of 50
6.8 Steam reduction
The steam reduction is activated until the temperature
detected by the steam reduction probe reaches the
temperature established with parameter t13 and is turned
back on when the temperature rises above the established
with the parameter t14 (i.e. "t13 + t14", only if the steam
reduction probe is enabled, i.e.if parameter P3 is set at 1).
To set the configuration parameters, see paragraph 15.2
“Setting the configuration parameters”.