EVCO EVCSR338J9 - Manual (Page 32)

EVCO S.p.A. Vcolor 338 S | Installer manual ver. 1.2 | Code 144VC338SE124
page 32 of 50
14 CONFIGURATION
14.1 Setting the time, date and day
of the week
Operate as follows to access the procedure:
1. Ensure that the device is switched on and that no
other procedure is in progress.
2. Touch .
3. Touch the middle of the display.
Operate as follows to select a value:
4. Touch .
Operate as follows to set a value:
5. Touch or within 15 s.
6. Touch .
Operate as follows to exit the procedure:
7. Touch .
Operate as follows to exit the procedure before the operation
is complete:
6. Touch before point 6.
Access to the time, date and day of the week setting procedure.
Setting the time, date and day of the week.