FingerTec FMM-100 - Manual (Page 20)

20
Alphanumeric User ID
You can set employee IDs with alphanumeric for example, ENG1003 represents staff ID
1003 from the Engineering Department. This alphanumeric ID recommended for large
organizations with multiple departments.The person in charge will know which depart-
ment the employees belong to by referring to their ID. Only enable this if your company
intends to separate employees from different departments.
Attendance Log Alert
You can set the device to prompt an alert message on screen every time it verifies an
employee when its storage is approaching the limit. The value range is from 1 to 99
(transaction counts). The device will always delete earlier records to free up space to
save the latest record (FIFO, first in first out), if storage is full. By default, the value is 99.
Change it if you want to apply another value.
Cyclic Delete ATT Data
You can set the device to delete a number of records when its storage is full. The value
range is from 1 to 999 records. For example, you can set the value at 500 records and the
device will delete the first 500 records to free up data to store new records.
Cyclic Delete ATT Photo
You can set the device to delete a number of stored photos when its storage is full. The
value range is from 1 to 99. For example, you can set the value to 50 and the device will
delete the first 50 photos to free up slots to store new images.
Confirm Screen Delay(s)
You can set the time delay for the device to display verification results (ID, name and
photo). The time range is from 1s to 9s.
Save Illegal Verification Record
You can set a time range to allow employees to verify for access, for example from 9:00
am to 6:00pm. Employees will be able to verify at the device before and after this time
range, but no access will be granted. However the device will record the employees ID
and attempted time of access. You can set the device to ignore these records to save
storage.