FingerTec FMM-100 - Manual (Page 24)

24
Voice
You can choose to enable or disable the voice prompts, keyboard sound or adjust the
volume of the device.
Go to Menu > Personalize > Voice > Press OK to Enter > Press arrow and OK button to
enable or disable the options:
• Voice Prompt: You can choose to disable or enable the voice greetings or feedback
during the operations.
• Keyboard Prompt: You can choose to enable or disable the beeping sounds when
pressing on the keys
• Volume: You can adjust the volume of the voice greetings/feedback and keyboard
beeps
Bell
You can schedule the device to ring automatically during specific times. This is a remind-
er to alert the employees to start/end work, start/end of break time etc. To activate this
function, you have to create a new bell schedule.
Go to Menu > Personalize > Bell Schedules > Press OK to Enter > New Bell Schedule > Set
the option accordingly:
• Bell Status: To turn the bell on or off.
• Bell Time: Set the time for the bell to ring automatically.
• Repeat: Set the bell to repeat on certain days or every day.
• Bell Type: You can set for the bell to be triggered from the internal bell or from an ex-
ternal bell that is wired to the device.
• Ring Tone: Select the bells’ preferred ring tone
• Internal Bell Relay: Specifies the time duration for the alarm to ring (ranges from 1s to
999s).
Edit and Delete a Preset Schedule
Once you have created a bell schedule, you can edit it or delete the schedule entirely.
Editing the function is similar to adding a new schedule.
You can edit all the parameters. Refer to chapter 4.3.