FingerTec s-Kadex Manual User Manual

S-kadex, User guide

Advertising

w w w . f i n g e r t e c . c o m

User Guide

s-Kadex

Stand-alone Card & Password

Access Control System

IMPORTANT



DELETING USER INFO

his guide serves as an important document

for consumers to operate s-Kadex. Keep this

guide intact for your future reference.

For any problems, kindly contact support@
fingertec. com for assistance.

ADMIN PASSWORD

Default Password: 1234
Operation: Press * > LED goes off > Buzzer emits long
beep > Press # > Insert the Admin password > Green
LED blinks > Buzzer emits long beep again > Admin
password verified successfully

Note: The admin password must be inserted before the start of any
operation in s-Kadex.

CHANGING ADMIN PASSWORD

It’s recommended that you change the default Admin
password to your very own 4-digit unique password. If
you want to use less than 4 digits, hash (#) symbol is
permitted. I.e.: 123 will be keyed in as 123#.
Operation: Verify default Admin password > Press 8 >
Insert new Admin password > Repeat new Admin
password > Green LED blinks > Buzzer emits long beep
> Admin password changed successfully



ENROLLMENT

s-Kadex assigns user IDs automatically. It ranges from
1 to 65534. Record the details of enrollment using a
form for future reference. Enroll cards as desired.

ENROLLING CARDS

Operation: Verify your Admin password > Press 1 >
Wave card once > Green LED blinks > Buzzer emits
long beep > Continue to enroll another card > Press *
to end process

Note: s-Kadex will blink its red LED and it’ll beep twice if the card
data had already been enrolled before.

ENROLLING A BATCH OF CARDS

Operation: Verify your Admin password > Press 6 >
Wave the 1st card once > Insert the total number of
cards (i.e. 50) > Press # if the total number is less than
3-digits for example 81#, 99# > Green LED blinks >
Buzzer emits long beep > Press * to end process

Note: All cards must have running card number in sequence.

SETTING PASSWORDS

s-Kadex supports 8 sets of passwords. Any of the
predefined passwords can unlock the device. Get ready
with the passwords before you register them in s-Kadex.
For example:

SET

PASSWORD

2331

4563

ENROLLING PASSWORDS

Operation: Verify your Admin password > Press 3 >
Green LED blinks > Buzzer emits long beep > Press the
number of password(s) set, e.g. 1 > Insert the password >
Insert the same password again > Green LED blinks >
Buzzer emits long beep again > Press * to end process

Note: If you want to continue enrolling more passwords, do not
press *, which will end the process. Instead, continue by inserting the
new set number and its new password. Maximum set of passwords
allowed is 8. Press # to fill in the gap if your chosen password is less
than 4-digits. I.e.: 123 will be keyed in as 123#.

DELETING USER ID

Operation: Verify your Admin password >
Press 2 > Green LED blinks > Buzzer emits long
beep > Insert the user ID for deletion > Press #
if the ID is less than 5-digits > Buzzer emits
long beep again > Press * to end process

Note: You can delete more users by inserting their user
ID after the long beep. Only press * after you have
finished deleting the users you want. In case the red LED
blinks after you’ve inserted the user ID, that particular ID
is not available in s-Kadex.

DELETING CARDS

Operation: Verify your Admin password >
Press 2 > Green LED blinks > Buzzer emits long
beep > Wave the enrolled card at the
induction area > Buzzer emits long beep again
> Press * to end process

DELETING PASSWORDS

Operation: Verify your Admin password > Press 3 >
Green LED blinks > Buzzer emits long beep > Insert the
set number, for example 2 > Insert 0000 > Insert 0000
one more time > Green LED blinks > Buzzer emits long
beep again > Press * to end process

Note: Only press * after you’ve finished deleting the fingerprint,
card or password data. In case the red LED blinks after you’ve
inserted one of the data, that particular user data is not available
in H3i.

DELETING DEVICE INFORMATION

Operation: Verify your Admin password > Press 9 >
Green LED blinks > Buzzer emits long beep > Press 9
again > Green LED blinks > Buzzer emits two long
beeps

Note: This deletion will not affect the passwords stored in H3i. The
password(s) must be deleted one by one.

Advertising

Popular Brands

Popular manuals