FingerTec TA300 - Manual

1
2
3
15-01-01 THU
TCMS V2
Quick Start Guide
TA300
The Quick Start Guide is intended to provide the user with simple instructions on how
to setup the terminal date/time and communication as well as to perform card enroll-
ment and verification. For more details on other topics of terminal management, refer
to the terminal’s hardware user manual available in the package or online at
• http://info.fingertec.com/timeline100-4
© 2015 Timetec Computing Sdn Bhd. All rights reserved • 012015
Setting the Date and Time

Select Timeset , insert the correct value and press OK to save the
settings.
Enrolling Card Users

Connect the USB cable to the computer and power up the TA300.

Press the Enroll FP button and press OK to start enrolling user.

Enter your User ID and press OK .

Follow the instructions on screen, scan your fingerprint 3 times.

Press OK to save the enrollment and then press ESC to exit to the
main screen.

Place your fingerprint on the scanner to test the verification, and repeat
enrollment process, if necessary.
Activating the Terminal on the TCMS V2 Software

Double click the TCMS V2 software icon.

Click on Devices and double click Setup FingerTec Terminals .

Click Add and enter your TCMS V2 Product Key - Refer to the reverse
side of the DVD.

Select the terminal under Model .

Insert the Device ID and IP Address into the columns.

Uncheck the Disabled checkbox column.

Wait for the software to link to the terminal.

Enter your Activation Key and click OK .