FingerTec Face ID 2 (FEM 600) Quick Start - Manual

4
TCMS V2
Quick Start Guide
For more info go to http://user.fingertec.com
TCMS V2 Installation
TCMS V2 Time Control Management System-V2
SOFTWARE
INSTALLATION
*Refer to TCMS V2 Manual
SOFTWARE SETTINGS
*Refer to TCMS V2 Manual
Face ID2
1
HARDWARE
INSTALLATION
Refer to hardware user manual /
installation guide/AdapTec AC & Plus
installer manual (consult qualified
installer)
FingerTec Terminal
Installation
2
HARDWARE SETTINGS
Refer to hardware user manual
User Enrollment
Face, Fingerprint,
Card, password
Communication
Settings 3
5 TCMS V2 Initial
Download user information
Download user, face, fingerprint, card
and password from terminal to computer
with TCMS v2
User Information
Fill up user information in TCMS V2
6
7
SOFTWARE SETTINGS
*Refer to TCMS V2 Manual. SET ALL if using both functions.
For Time Attendance Functions
(Skip steps 8 & 9 if you are NOT using time attendance functions)
Settings of Working Time & Group
Assign Users To Working Group
For Door Access Functions
(Skip steps 10,11 &12 if you are NOT using door access functions)
Time Zone & Access Code Settings
Assign User With Access Code
Upload Settings to Terminal
8
9
10
11
12
01101101100010010
10111010111010001
0111001101000101
011011011100101010
0100100101110010
0110110110001110
1011101011101010
0111001101001001
01101101110010101
0101010101101001
DAILY OPERATION
*Refer to TCMS V2 Manual
Download Data From
Terminal To Computer
Exporting Data Into Third Party
Software (i.e. Payroll)
* Skip this step if you are NOT using third party
software
View & Print Report
13
14
15
START
COMPLETE