FingerTec FMM-100 - Manual (Page 27)

27
Chapter 5
USB Manager
USB drives can be utilized to transfer data between FingerTec devices and software if a
cable is unavailable. You can export employees’ attendance records (transaction logs)
from the device to the USB drive, and import the data from the drive directly to your
management software and vice versa.
Download
To copy data from a device into a USB drive, attach the USB drive to the device and:
Go to Menu > USB Manager > Download
You can select the following data type to copy into the USB drive:
• Download Attendance Data: Download attendance data.
• Download User Data: Download employees’ data (face/fingerprint templates, pass-
word, card ID, names).
• Download User Portrait: Download employees’ photos.
• Download Attendance Photo: Download photos captured while an employee is suc-
cessfully verified. The photos are in JPEG format.
• Download Blacklist Photo: Download the photo (captured while employee fails to
verify at the device) into USB device. The photos are in JPEG format.
• Download Work Code: Download the work code ID.
• Download Short Message: Download the short message.
Upload
Uploading is the process of copying data from a USB drive into a device. The data has to
be copied from the software to the USB Drive. To begin uploading your data, connect
the USB to your device and:
Go to Menu > USB Manager > Upload
• Upload User Portrait: Upload employees’ photos.
• Upload Work Code: Upload the work code ID.
• Upload Short Message: Upload the short message.