FingerTec FMM-100 - Manual (Page 14)

14
• Heartbeat Server: Enter the public IP address of your Webster or TimeTec Cloud server.
The device frequently sends status and data updates to Webster or TimeTec Cloud. In
the rare case that the connection to the server drops out, the device will perform an
automatic restart.
• Details: This includes information about the connected mobile devices such as network
mode, Telco operator, IP address and the total data sent and received.
Conf
.
igure Webster
FingerTec Webster is a web storage application for managing content that are sent from
your devices. The contents include information pertaining to user verification credentials,
transaction logs and device settings. You will be required to assign an IP address to the
server to connect all devices via an Internet connection. The public IP address must be
entered into the device to allow a connection.
To configure Webster, locate the submenu “ADMS”. The options within this submenu are
used to connect all Webserver settings such as the Webserver IP Address, port and proxy
settings.
Step 1: Menu > COMM. Settings > ADMS > Press OK to enable the domain name.
Step 2: Configure all related settings in the page.
• Enable Domain Name: You can access Webster using a domain name in the format of
“http://” once you have enabled this function. Alternately, you can enter the IP address
to access Webster
• Server Address: Webster’s Public IP address
• Server Port: Webster’s server port number
• Enable Proxy Server: If you choose to enable this function, you must set the IP address
and port number of the proxy server. You may choose to enter the proxy IP address of
your proxy server for Internet access.