GTCO Summagrid IV - Users Guide Part 3 - Manual (Page 14)

Summagrid IV 14
Refer to the key for definitions of the format characters.
For reports, low resolution is:
FXXXXSYYYY<CR><LF>
For reports, high resolution is:
FXXXXXSYYYYY<CR><LF>
Character Definition
S
X
,
Y
FF Space (optional)
A digit of the X coordinate, where each digit is an ASCII character, 0
through 9
The delimiter character. The default is an ASCII comma
A digit of the Y coordinate, where each digit is an ASCII character, 0
through 9
Flag character, identifying the transducer buttons being pressed. The
possible combinations are listed in the table below.