GTCO CR 1212 - Configuration - Manual (Page 2)

Disassembling the Tablet
1. Ensure the tablet is turned off and all cables, clips, etc. are removed.
2. Turn the tablet upside-down on a clean, smooth surface that will not mar it. The
bottom cover should be facing you.
3. Using a Phillips head screwdriver, remove the three cover screws. (A magnetic
screwdriver is helpful because the screws are recessed.)
NOTE: Do not press down hard on the screws. Too much pressure can strip the screw
threads. Lay the screws aside.
Notice the bottom and top covers are held together by tabs on the bottom cover.