HONDA 2007 CR-V - Owner's Manual - Manual (Page 212)

When in reverse, the touch screen
and navigation system ‘‘hard’’
buttons are locked out, except the
‘‘ZOOM’’ button. Touching the ‘‘
’’
or ‘‘ ’’ button allows you to adjust
the brightness of the rearview
camera image.
Since the rearview camera display
area is limited, you should always
back up slowly and carefully, and
look behind you for obstacles. Whenever you shift to reverse (R)
with the ignition switch in the ON
(II) position, the rear view is shown
on the navigation system screen.
For the best picture, always keep the
rearview camera clean, and do not
cover the camera lens. To avoid
scratching the lens when you clean it,
use a moist, soft cloth.
On EX-L model with navigation system
Rearview Camera and Monitor
208
The camera brightness cannot be
adjusted by voice control.
Main Menu Table of Contents