Lights, cleaning the seat belts, floor mats – HONDA 2007 CR-V - Owner's Manual User Manual

Page 287

Advertising
background image

The driver’s floor mat that came
with your vehicle hooks over the
floor mat anchors. This keeps the
floor mat from sliding forward and
possibly interfering with the pedals.

Dirt build-up in the loops of the seat
belt anchors can cause the belts to
retract slowly. Wipe the insides of
the loops with a clean cloth
dampened in mild soap and warm
water or isopropyl alcohol.

If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.

Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Press the brake pedal to make
sure the new bulb is working.
Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
Put the cover back on the light
assembly. Push it in until it locks
in place.

4.

5.

6.

7.

CONTINUED

Floor Mats

Cleaning the Seat Belts

Lights, Cleaning the Seat Belts, Floor Mats

Ma

int
e

na
nce

283

LOOP

Main Menu

Table of Contents

s

t

Main Menu

Table of Contents

Advertising