HONDA 2007 CR-V - Owner's Manual - Manual (Page 283)

Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
(Driver’s side)
Reinstall the coolant reserve tank.
Open the hood.
To change the turn signal bulb on
the driver’s side, remove the
engine coolant reserve tank by
pulling it out of its holder.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
1. 2.
3.
4.
5.
6.
Lights
Replacing a Front Turn Signal
Light Bulb
Ma
int
e
na
nce
279
s t Main Menu Table of Contents