HONDA 2007 CR-V - Owner's Manual - Manual (Page 215)

Even with the cruise control turned
on, you can still use the accelerator
pedal to speed up for passing. After
completing the pass, take your foot
off the accelerator pedal. The vehicle
will return to the set cruising speed.
You can cancel cruise control in any
of these ways:
Push the CANCEL button on the
steering wheel.
Resting your foot on the brake pedal
causes cruise control to cancel.
Tap the brake pedal.
Push the CRUISE button on the
steering wheel.
Pressing the CRUISE button turns
the system off and erases the
previous cruising speed.
When you push the CANCEL button,
or tap the brake pedal, the system
remembers the previously set speed.
To return to that speed, accelerate to
above 25 mph (40 km/h), and then
press and release the RES/ACCEL
button. The CRUISE CONTROL
indicator comes on. The vehicle
accelerates to the same speed as
before.
Resuming the Set Speed Canceling Cruise Control
Cruise Control
Fe
a
tu
re
s
211
Main Menu Table of Contents