Service station procedures – HONDA 2007 CR-V - Owner's Manual User Manual

Page 221

Advertising
background image

To close the hood, lift it up slightly to
remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot (30 cm) above the
fender, then let it drop. Make sure it
is securely latched.

Park the vehicle, and set the
parking brake. Pull the hood
release handle located under the
lower left corner of the dashboard.
The hood will pop up slightly.

Reach in between the hood and
the front grille with your fingers.
The hood latch handle is above
the ‘‘H’’ logo. Push this handle up
until it releases the hood. Lift the
hood.

If the hood latch handle moves
stiffly, or if you can open the hood
without lifting the handle, the
mechanism should be cleaned and
lubricated.

Holding the grip, pull the support
rod out of its clip. Insert the end
into the designated hole pointed
by an arrow in the hood.

2.

1.

3.

Opening and Closing the Hood

Service Station Procedures

B

e

fo

re

D

riv

ing

217

LATCH

CLIP

GRIP

SUPPORT ROD

HOOD RELEASE HANDLE

Main Menu

Table of Contents

Advertising