HONDA 2007 CR-V - Owner's Manual - Manual (Page 91)

Push and hold the brake pedal,
then move the shift lever out of
Park (P).
Push and hold the rear of the
master door lock switch on the
driver’s door. You will hear a
clicking sound. Continue to hold
down the switch:
Set the parking brake.
Make sure the shift lever is in
Park (P), and open the driver’s
door.
Turn the ignition switch to the ON
(II) position.
Push and hold the rear of the
master door lock switch on the
driver’s door. You will hear a
clicking sound, and after about 5
seconds, you will hear another
clicking sound.
Until you hear one click (after
about 5 seconds) to activate the
driver’s door unlock feature.
Or, until you hear a second click
(after about 10 seconds) to
activate the all doors and tailgate
unlock feature.
4. 4.
5.
1.
2.
3.
CONTINUED
To turn the auto door unlock modes
of f :
Door Locks
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
87
Release the switch and then,
within 5 seconds, turn the ignition
switch to the ACCESSORY (I)
position.
6.
Move the shift lever to the
PARK (P) position, then turn the
ignition switch to the LOCK (0)
position.
7.
Release the switch and then,
within 5 seconds, turn the ignition
switch to the LOCK (0) position.
5.
Main Menu Table of Contents