9b0707o00044a, Installing a child seat – HONDA 2007 CR-V - Owner's Manual User Manual
Page 48
Advertising
Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats have
a rigid-type connector as shown
above.
Other LATCH-compatible seats have
a flexible-type connector as shown
above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Remove the head restraint (see
page ). Make sure the removed
head restraint is secured in the
cargo area.
Reinstall the head restraint when the
child seat is removed.
Remove the dual deck cargo shelf
(see page
).
5.
4.
3.
6.
If equipped
Installing a Child Seat
44
Flexible type
Rigid type
Main Menu
Table of Contents
Advertising