HONDA 2003 CR-V - Owner's Manual - Manual (Page 191)

If you can open the hood without
lifting the hood latch handle, or the
hood latch handle moves stiffly or
does not spring back as before, the
mechanism should be cleaned and
lubricated (see page
).
To close the hood, lift it up slightly to
remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot (30 cm) above the
fender, then let it drop.
After closing the hood, make sure it
is securely latched.
Pull the support rod out of its clip
and insert the end into the hole in
the hood. 3.
266
CONTINUED
Service Station Procedures
Bef ore Driving 187
CLIP
SUPPORT ROD
Main Menu Table of Contents