HONDA 2003 CR-V - Owner's Manual - Manual (Page 318)

Put the flat tire on the spare tire
holder. Put the wheel nuts on
finger-tight, then tighten them
with the wheel wrench. Put the
center spacer in the center of the
wheel.
Store the jack in its holder. Turn
the jack’s end bracket to lock it in
place. Install the cover on the side
of the cargo area.
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
Remove the center cap from the
flat tire.
Lower the vehicle to the ground
and remove the jack.
23.
21. 22. 24.
25.
Taking Care of the Unexpected
Changing a Flat Tire
314
CENTER SPACER
80 lbf·ft (108 N·m , 11 kgf·m)
Main Menu Table of Contents