HONDA 2003 CR-V - Owner's Manual - Manual (Page 276)

Examine the new wiper blades. If
they have no plastic or metal rein-
forcement along the back edge,
remove the metal reinforcement
strips from the old wiper blade and
install them in the slots along the
edge of the new blade. Remove the blade from its holder
by grasping the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder. Disconnect the blade assembly
from the wiper arm by pushing in
the lock tab. Hold the lock tab in
while you push the blade assembly
toward the base of the arm.
If you are changing the rear wiper
blade, go to step 6.
4. 3. 2.
Maintenance
Wiper Blades
272
LOCK TAB
BLADE REINFORCEMENT
BLADE
Main Menu Table of Contents