HONDA 2003 CR-V - Owner's Manual - Manual (Page 291)

Open the hood.
Your vehicle has halogen headlight
bulbs, one on each side. When
replacing a bulb, handle it by its steel
base and protect the glass from
contact with your skin or hard
objects. If you touch the glass, clean
it with denatured alcohol and a clean
cloth. The headlights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustment of the headlights should
be performed by a Honda technician
or other qualified mechanic.
Remove the electrical connector
from the bulb by pulling the
connector straight back.
Remove the rubber weather seal
by pulling on the tab.
1.
2.
3.
CONTINUED
Replacing a Headlight Bulb Headlight Aiming
Maintenance
Lights
287
WEATHER SEAL
CONNECTOR HOLD-DOWN WIRE
BULB
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.
Main Menu Table of Contents