Changing a flat tire – HONDA 2003 CR-V - Owner's Manual User Manual

Page 316

Advertising
background image

Loosen the five wheel nuts 1/2
turn with the wheel wrench.

Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
center of the jacking point tab is
resting in the jack notch.

Use the extension and wheel
wrench as shown to raise the
vehicle until the flat tire is off the
ground.

15.

16.

17.

Taking Care of the Unexpected

Changing a Flat Tire

312

WHEEL NUT

JACKING POINT

WHEEL WRENCH

EXTENSION

Main Menu

Table of Contents

Advertising