HONDA 2003 CR-V - Owner's Manual - Manual (Page 294)

Open the tailgate. Place a cloth on
the edge of the cover. Remove the
covers by carefully prying on the
edge with a small flat-tipped
screwdriver. Use a Phillips-head screwdriver to
remove the taillight assembly
mounting screw under each cover. Determine which of the four bulbs
is burned out: stop/taillight, back-
up light, turn signal, or side
marker.
Remove the socket by turning it
one-quarter turn counterclockwise.
Pull the taillight assembly out of
the rear pillar.
1. 2.
3.
4.
5.
Lights
Maintenance
Replacing Rear Bulbs
290
BULBS
SCREW
COVER
Main Menu Table of Contents