Limited slip differential – HONDA 2001 Passport - Owner's Manual User Manual

Page 186

Advertising
background image

There are no provisions in your

vehicle to tap into its hydraulic

braking system. Any attempt to

attach the trailer's brakes to your

vehicle's hydraulic braking

system, no matter how successful

it may seem, will lower braking

effectiveness and create a

potential hazard.

Equipment Check

Before operating your vehicle,

check all safety equipment to

ensure safe operation. Be sure

your vehicle is properly serviced

to avoid mechanical failure.

Check that your vehicle remains

level when the loaded or unloaded

trailer is hitched. Do not drive if

the rear end of your vehicle is

abnormally higher or lower.

Check for proper tongue weight,

overload, improper weight

distribution, worn suspension, or

other possible causes.

Make sure the trailer load is

properly positioned and secured

so its does not shift around while

driving.

Check if your rearview mirrors

comply with federal, state and

local regulations. If not, confirm

the proper mirrors required for

towing and have them installed.

Perform an equipment check of

all braking, lighting and safety

equipment to ensure they are

working properly.

Your safety depends on proper

operation and installation of

equipment. Never operate a

vehicle with faulty equipment.

Standard on 4WD models

The limited slip differential is

designed to improve traction by

limiting wheelspin. If one rear

wheel begins to spin on a slippery

surface, the limited slip

differential will automatically

transmit driving force to the other

rear wheel.

Driving Tips

Limited Slip Differential

Main Menu

Table of Contents

Advertising