Parking brake – HONDA 2001 Passport - Owner's Manual User Manual

Page 90

Advertising
background image

Parking Brake

Operation

To set the parking brake, fully

pull up on the handle between the

seats. To release the parking

brake, pull upward slightly. Then

depress the pushbutton and push

down all the way.

To help remind you, the brake

system warning light is designed

to come on if the parking brake

control is not fully released when

the key is on.

Always pull the parking brake

lever as far up as possible to make

sure it sets fully. If the parking

brake is not fully set, the vehicle

could roll if it is parked on an

incline.

Parking Tips

Never drive away with the

parking brake still set. This may

overheat the rear brakes, reducing

their effectiveness and causing

excessive wear or damage.

Always apply the parking brake

whenever you leave the vehicle,

whether it is equipped with a

manual or automatic transmission.

If your vehicle is equipped with

an automatic transmission, you

should set the parking brake

whenever you leave the driver's

seat. If the vehicle is parked on a

grade and the shift lever is placed

in "P" (Park) position before the

parking brake is set, the weight

of the vehicle may exert so much

force on the parking mechanism

in the transmission that you may

have difficulty moving the shift

lever out of "P" (Park).

To prevent this, apply the parking

brake BEFORE you move the

shift lever to "P" (Park) position.

When preparing to drive away,

move the shift lever out of the

"P" (Park) position BEFORE you

release the parking brake. It is

good driving practice to set the

Instruments and Controls

RELEASE

Main Menu

Table of Contents

Advertising