HONDA 2001 Passport - Owner's Manual - Manual (Page 85)

Shifting the Transfer Control
Lever
4H 4L: Stop the vehicle. Place
the transmission lever in
" N" (Neutral) position.
Then move the transfer
control lever from 4H to
4L, or 4L to 4H.
Move the transfer control lever
quickly and securely between
positions. Do not stop midway.
The transfer gear box can be
damaged if the control lever is not
firmly in gear. Some noise is
normal when shifting.
Always stop the vehicle before
shifting between low and high
range (4H 4L or 4L 4H).
If the 4WD indicator continues to
blink rapidly, it indicates that the
system was shifted out of
sequence. Stop the vehicle, select
4WD with the 4WD-2WD switch,
shift the lever from 4L to 4H, then
select 2WD. Drive in a straight
line to reset the system. If the
indicator continues to blink, see
your Honda dealer.
Do not use 4-wheel drive for
driving on dry pavement. This
causes noise and wear, and taking
tight turns can damage the
transfer case and driveshafts. It
also reduces fuel economy.
Be careful that you do not exceed
the following maximum allowable
speeds when accelerating.
Driving Pattern Selector
You can select a driving pattern
suitable for existing driving
conditions.
When neither "POWER" nor
"WINTER" lights are illuminated,
the normal driving program for
general driving conditions is
operative.
Instruments and Controls
Main Menu Table of Contents