HONDA 2000 Prelude - Owner's Manual - Manual (Page 220)

Lights
Replacing a Front Side Marker
Light Bulb
1. Use a Phillips-head screwdriver to
remove the side marker assembly's
mounting screw.
2. Remove the side marker assembly
from the bumper.
3. Remove the socket from the side
marker assembly by turning it one-
quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
5. Insert the socket back into the
side marker assembly. Turn it
clockwise to lock it in place.
6. Test the side marker to make sure
the new bulb is working.
7. Put the side marker assembly into
the bumper. Make sure the tab on
the side marker assembly fits into
the bumper slot. Tighten the
mounting screw.
Maintenance
SCREW
BULB SOCKET
FRONT SIDE MARKER ASSEMBLY
Main Menu Table of Contents