Folding rear seat, power windows – HONDA 2000 Prelude - Owner's Manual User Manual

Page 88

Advertising
background image

Folding Rear Seat, Power Windows

Make sure both rear shoulder belts

are positioned in front of the rear

seat-back whenever the seat-back is

in its upright position.

Make sure all items in the trunk, or

items extending through the opening
into the back seat, are secured.
Loose items can fly forward and
cause injury if you have to brake

hard. See

Carrying Cargo on page

135

.

Never drive with the seat-back

folded down and the trunk lid open.

See

Carbon Monoxide Hazard on

page

4 9

.

Power Windows

Your car's windows are electrically-

powered. Turn the ignition switch to

ON (II) to raise or lower any window.

Each door has a switch that controls
its window. To open the window,

push the switch down and hold it.

Release the switch when you want

the window to stop. Close the

window by pulling back on the

switch and holding it.

The driver's armrest has a master

power window control panel. To

open the passenger's window, push

down on the switch and hold it down

until the window reaches the desired

position. To close the window, pull

back on the window switch. Release
the switch when the window gets to
the position you want.

CONTINUED

Instruments and Controls

DRIVER'S WINDOW

SWITCH

MAIN

SWITCH

Main Menu

Table of Contents

Advertising