HONDA 2000 Prelude - Owner's Manual - Manual (Page 223)

Lights
6. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
7. Test the lights to make sure the
new bulb is working.
8. Reinstall the trunk lining.
9. Reset the fastener by pushing on
the pointed end until it pops back
almost flush with the fingers on
the housing.
10. Put the fastener in the hole in the
side of the trunk lining and push
on the center until it locks (the
center is flush with the head).
Maintenance
Main Menu Table of Contents