I.C.E. 3 OSDs - Manual (Page 26)

DISCHARGE
DISTRIBUTION DUCT
AIR
FIGURE #6
INSULATION
RETURN AIR FLOW
DIRECT GAS FIRED MAKE-UP AIR HEATERS
PANEL
CONTROL
UNIT MUST BE LIFTED AND HANDLED WITH THESE HOLES WHEN MOVING UNIT INTO POSITION TO BE SUSPENDED FROM CEILING.
THESE HOLES ARE PROVIDED TO ALLOW
SUSPENSION RODS TO BE INSERTED THRU
THE BASERAIL SO THAT THE UNIT MAY
BE SUSPENDED FROM THE CEILING.
5/8"
Ø
(FOR LARGE UNITS
CONSULT FACTORY
FOR HOLE SIZE)
LIFTING LUG DETAIL
MIX BOX/V-BANK FILTER SECTION
BURNER BLOWER SECTION
FRESH AIR FLOW
INSULATION
DISTRIBUTION DUCT
DAMPER
By
Rev
Revision Description
Date
DRW. NO. JOB NO.
REV
DATE
DRAWN BY CHK. BY TITLE
SCALE
ISSUED BY
DIRECT GAS FIRED MAKE-UP AIR HEATERS SUSPENSION HOLES DETAIL FOR INDOOR UNIT
OSD
SERIES
JV
MAY 8/2001
NTS
FIG. 6
-
25
JV